7-75 (2018)
| 7-75 | |
|---|---|
 | |
| Overview | |
| Year | 2018 |
| Manufacturer | Pierce |
| Type | Aerial |
| Chronology | |
| Predecessor | None |
| At-a-Glance | |
|---|---|
| Model | Velocity |
| Sub Type | Ladder |
| Serial Number | 31137 |
| Features | |
| Aerial Height | 75' |
| Pump Capacity | 2000 GPM |
| Water Capacity | 500 USG |
| Notable Dates | |
| Delivery | March 6, 2018 |
| In Service | July 25, 2018 |
General
- Apparatus Type: Aerial
- Apparatus Sub Type: Ladder
- Manufacturer: Pierce
- Year: 2018
- Serial Number: 31137
- VIN: 4P1BCAGFXJA018573
- Color: Gray metallic over maroon
- NIMS Resource Typing: Aerial Ladder Type III
Chassis/Cab
- Model: Velocity
- Cab Material: Aluminum
- Crew Capacity: 7
- Doors: 4
- Raised Roof: 10" notched
- Front Bumper: 19" extended with two preconnects
- Length: 167 inches (13 ft 11 in) overall • 70 inches (5 ft 10 in) crew cab
- Tilt: Full
- Misc. Features: Barrier style doors • TAK-4 front suspension • Onspot chains
Drivetrain
- Propulsion: Diesel
- Engine Make/Model: Detroit Diesel DD13
- Engine Specs: 12.8 L, 505 hp, 1750 lb-ft, Inline 6
- Transmission Make/Model: Allison 4000 EVS
- Transmission Specs: 5-speed automatic
Pump & Tank
- Pump Make/Model: Hale Qmax200
- Pump Capacity: 2000 GPM, single-stage
- Pump Location: Midship
- Drive Type: Split-shaft
- Water Capacity: 500 USG
Aerial
- Aerial Model: 75 HAL
- Mounting: Rear
- Vertical Reach: 75'
- Horizontal Reach: 68'
- Sections: 3
- Material: Aluminum
- Tip Load: 750 lbs dry, 500 lbs wet
- Prepiped Waterway: Yes
- Outriggers: H-Style, Single set, 16' spread
- Features: Pinnable waterway
Body
- Material: Aluminum
- Length: 272 inches (22 ft 8 in) overall • 208.5 inches (17 ft 4.5 in) body • 60 inches (5 ft 0 in) pumphouse
- Misc. Features: Texas Chute Out (side stack hosebed) • Roll up compartment doors
Equipment
- Generator: Smart Power HR-10 10 kW PTO hydraulic
- Reels: 1 electrical
Dimensions
- Overall Height: 137 inches (11 ft 5 in)
- Overall Length: 447 inches (37 ft 3 in)
- Wheelbase: 233.5 inches (19 ft 5.5 in)
Construction
- Factory: Appleton, WI
- Dealer: Firematic Supply
- Construction Started: October 2017
- Construction Complete: January 2018
- Delivery Date: March 6, 2018
Disposition
- In Service Date: July 25, 2018
- Misc. History: Originally intended to replace the 2001 Sutphen Pumper (7-2000), that plan was ultimately not implemented. The 1986 GMC/Sutphen Mini-Pumper (7-MP) was retired in order to make room in the firehouse, however this truck is not considered to be a direct replacement for the MP, instead considered an additional piece.
CAD Drawing: 
2018 Pierce 7-75 CAD Drawing